Neoflex – H
To re-heat fluids that either solidify or become viscous due to ambient Temperatures during transit or at the point of discharge. The heating Hose is made or Rubber and encased within a heat resistance PE-film.
The time taken to heat the Liquid does depend upon both the outside ambient Temparature and the temperature of hot Water/Steam, but averagely work on 3/4 hours (max hot Water/Syeam 70* celcius)
TECHNICAL SPECIFICATION OF THE HOSE USED IN NEOFLEX-H
Temperature(oC ) | Method | Value | Unit | |
Density | – | DIN 1872 | 0.950 | gr/cm3 |
Tensile Strength | 20
|
DIN 53455
|
290-300
|
kg/cm2 |
Elongation | 100
20 100 |
DIN 53455
DIN 53455 DIN 53455 |
200-220
300-350 500-600 |
kg/cm2
% % |
Elasticity | -40
0 20 80 |
DIN 53457
DIN 53457 DIN 53457 DIN 53457 |
19000
15000 12000 5000 |
kg/cm2
kg/cm2 kg/cm2 kg/cm2 |
Impact Strength | -150
-100 0 20 |
DIN 53453
DIN 53453 DIN 53453 DIN 53453 |
Not broken
Not broken Not broken Not broken |
–
– – – |
Working temperature | – | – | -100 +110 | oC |
Linear Stretching Factor | 20
100 |
2.5X10-4
135 |
oC-1
oC |
|
Melting temperature | 135 | oC | ||
Heat conductivity | 0.35 | Kcal/hmoC | ||
Specific Temperature | 0.50 | Cal/gr |